|
High Steer Kit |
 |
|
High Steer Kit |
|
What is our high steer kit:
- Our high steer kits consist of our high steer arms and our custom made draglinks and tie-rods. The tie-rods & draglinks are made from 1.75inch 4140 chromoly hex bar and drilled & tapped to suit the required rod-end. This kit will transform the strength, performance and look of your trucks steering.
Why have a high steer kit – performance, design & strength:
- Note these are in addition to positives noted in the High Steer Arm section (High Steer Arm Link)
- The high steer kit will lift your venerable tie-rod out of harms way while at the same time improving your draglinks steering geometry for better handling. When you lift your truck the steering performance suffers because your draglink’s working angle increases plus it becomes too short resulting in bump steer and loss of steering lock respectively. Lifting and making a custom length tie-rod & draglink will eliminate these issues.
Should your tie-rod or draglink take a hit or for that matter have the truck suspended off it you can be assured due to the quality of material and components used your steering will easily hand the punishment.
Conclusion, no more bent tie-rods and poor handling.
Available for Nissans & Toyotas
$1,165 Hilux
$1,350 Patrol
Other available Options:
- For off-road use only & the DIYer pre-cut & drilled hex bar, thread inserts, high quality Endura rod-ends and high misalignment washers and Endura rod-ends joints can be supplied to fabricate your tie-rod & draglink.
|
|
|
|
|
|
|
Custom Engineering