|
High Steer Arms |
 |
|
High Steer Arms |
|
The M&M High Steer Arms are CNC machined from 4140 billet to our own design. The King Pins are precisionally CNC machined with it's head drilled and tapped. Therefore, once the king pin has been pressed into the bottom of the arm a stud is screwed in tight from the top of the arm.
This design is superior in quality to it's competitors particularly cast designs. Using billet eliminates the pitfalls of casting for example casting can cause small cavities which only become visible if you were to break the arm or do a cut away of it. These imperfections lead to weak points in the arms and ultimately failure. Therefore, running bigger tyres and/or hydro steering will expose the cast’s weak link.
With our design the tapered stud & the tie-rod end holes are machined to ensure the precision fitting of the studs, cone washers and tie-rod ends. If the fit is not precise (as possible in cast) the slack/play will lead to the studs and or the tie-rod to shear off and therefore potential disaster. However, we do recommend with any design to periodically check the studs & tie-rod for play to ensure they are tight.
Available for Nissans & Toyotas:
From:
$615 - Hilux
$850 - Patrol
|
|
|
|
|
|
|
Miscellaneous